View LA73062V_1077907.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA0909
LA73062V
Overview
Monolithic Linear IC
Video Driver for Wideband
The LA73062V is a wideband video output interface. It is ideal as a driver for Composite, S, YPbPr, and RGB analog video signal outputs. Incorporating low pass filters (6/12/30MHz), the LA73062V can also serve as a digital clock noise rejection filter.
Functions
* Six channel output * 6MHz low pass filter (SD) / 12MHz or 30MHz low pass filter (HD) * 6dB amplifier * Output mute * Y/C_MIX * S_DC_Output * D_DC_Output * Standby mode
Specifications
Maximum Ratings at Ta=25C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta75C, Mounted on a circuit board* Conditions Ratings 6.0 780 -20 to +75 -40 to +150 Unit V mW C C
* Mounted on a specified board: 114.3mmx76.1mmx1.6mm, glass epoxy.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment.
82907 TI IM 20070410-S00002 No.A0909-1/12
LA73062V
Recommended Operating Conditions at Ta = 25C
Parameter Recommended supply voltage Operating supply voltage range Input pin voltage application range Symbol VCC VCCopg VIN Conditions Ratings 5.0 4.75 to 5.25 -0.3 to Vccopg+0.3 Unit V V V
Electrical Characteristics at Ta=25C, VCC=5.0V
Input signal Parameter Point Current consumption 1 Current consumption 2 Internal reference regulator REG3V Video driver part Voltage gain 1 CV,Y,Py,R,G,B T2A T2A T15A T13A T15A T17A Voltage gain 2 C,Pr,Pb Frequency response 1(SD) CV,Y Frequency response 2(SD) C Frequency response 3(SD) CV,Y Frequency response 4(SD) C Frequency response 5(HD) Py,R,G,B T15A T13A T15A T17A Frequency response 6(HD) Pr,Pb Frequency response 7(HD) Py,R,G,B T13A T17A T15A T13A T15A T17A Frequency response 8(HD) Pr,Pb Frequency response 9(HD) Py,R,G,B T13A T17A T15A T13A T15A T17A Frequency response 10(HD) Pr,Pb Frequency response 11(HD) Py,R,G,B T13A T17A T15A T13A T15A T17A Frequency response 12(HD) Pr,Pb Frequency response 13(HD) Py,R,G,B T13A T17A T15A T13A T15A T17A SIG1 0.3 75M SIG3 0.3 30M SIG1 0.3 30M SIG3 0.3 20M SIG1 0.3 20M SIG3 0.3 75M SIG1 0.3 75M SIG3 0.3 12M SIG1 0.3 12M T22 T24 T22 T20 T24 T20 T22 T24 T22 T20 T24 T20 T22 T34 T22 T20 T24 T20 T22 T34 T22 T20 T24 T20 T22 T34 T22 T20 30MHzLPF is selected. f=30MHz/100kHz 30MHzLPF is selected. f=75MHz/100kHz -40 -30 dB -4.0 -1.5 1.0 dB 30MHzLPF is selected. f=20MHz/100kHz 30MHzLPF is selected. f=30MHz/100kHz -4.0 -1.5 1.0 dB -1.0 0.0 1.0 dB 12MHzLPF is selected. f=75MHz/100kHz 30MHzLPF is selected. f=20MHz/100kHz -1.0 0.0 1.0 dB -40 -30 dB 12MHzLPF is selected. f=12MHz/100kHz 12MHzLPF is selected. f=75MHz/100kHz -40 -30 dB -3.0 0.0 3.0 dB T2A T2A T4A SIG3 0.3 27M SIG1 0.3 27M T36 T34 T32 T4A T13A T17A T2A T2A T4A SIG3 0.3 6M SIG1 0.3 6M SIG3 0.3 100k SIG1 0.3 100k T36 T34 T22 T24 T22 T20 T32 T24 T20 T36 T34 T32 6MHzLPF is selected. f=6MHz/100kHz 6MHzLPF is selected. f=6MHz/100kHz 6MHzLPF is selected. f=27MHz/100kHz 6MHzLPF is selected. f=27MHz/100kHz 12MHzLPF is selected. f=12MHz/100kHz -3.0 0.0 3.0 dB -3.0 -3.0 0.0 0.0 -40 -40 3.0 3.0 -30 -30 dB dB dB dB Output gain 5.5 6.0 6.5 dB 5.5 6.0 6.5 dB Output gain T30 2.8 3.0 3.2 V Signal Level [Vpp] Freq [Hz] Out Test Condition Point At a no signal. Standby mode. At a no signal. min 68 0.0 typ 86 0.5 max 104 1.0 mA mA Ratings unit
Continued on next page.
No.A0909-2/12
LA73062V
Continued from preceding page.
Input signal Parameter Point Frequency response 14(HD) Pr,Pb 2nd order distortion 1(SD) CV,Y,Py,R,G,B T13A T17A T2A T2A T15A T13A T15A T17A 2nd order distortion 2(SD) C,Pr,Pb 2nd order distortion 3(HD) Py,R,G,B T4A T13A T17A T15A T13A T15A T17A 2nd order distortion 4(HD) Pr,Pb Amount of mute attenuation 1 CV,Y,Py,R,G,B T13A T17A T2A T2A T15A T13A T15A T17A Amount of mute attenuation 2 C,Pr,Pb Crosstalk between channels 1 CV,Y,Py,R,G,B T4A T13A T17A T2A T2A T15A T13A T15A T17A Crosstalk between channels 2 C,Pr,Pb Video S/N 1(SD) CV,Y T4A T13A T17A T2A T2A SIG2 0.65 T36 T34 VIN=Video (50%White) 6MHzLPF is selected. The band is between 100kHz and 4.2MHz. Video S/N 2(HD) Py,R,G,B T15A T13A T15A T17A G.D.1(SD) CV,Y G.D.2(SD) C G.D.3(HD) Py,R,G,B T15A T13A T15A T17A G.D.4(HD) Pr,Pb G.D.5(HD) Py,R,G,B T13A T17A T15A T13A T15A T17A G.D.6(HD) Pr,Pb T13A T17A SIG3 0.3 30M SIG1 0.3 30M SIG3 0.3 12M SIG1 0.3 12M T22 T24 T22 T20 T24 T20 T22A T24A T22A T20A T24 T20 30MHzLPF is selected. f=30MHz/100kHz 10 20 ns 12MHzLPF is selected. f=12MHz/100kHz 30MHzLPF is selected. f=30MHz/100kHz 10 20 ns 10 20 ns T2A T2A T4A SIG3 0.3 6M SIG1 0.3 6M SIG2 0.65 T22A T24A T22A T20A T36 T34 T32 VIN=Video (50%White) 30MHzLPF is selected. The band is between 100kHz and 30MHz. 6MHzLPF is selected. f=6MHz/100kHz 6MHzLPF is selected. f=6MHz/100kHz 12MHzLPF is selected. f=12MHz/100kHz 10 20 ns 20 20 40 40 ns ns SIG3 0.7 4M -60 -50 dB -60 -50 dB SIG1 0.7 4M SIG3 0.7 4M SIG1 0.7 4M SIG3 0.7 10M SIG1 0.7 10M SIG3 0.7 4M SIG1 0.7 4M Signal SIG3 Level [Vpp] 0.3 Freq [Hz] 75M Out Test Condition Point T24 T20 T36A T34A T22A T24A T22A T20A T32A T24A T20A T22A T24A T22A T20A T24A T20A T36 T34 T22 T24 T22 T20 T32 T24 T20 -60 -50 dB -60 -50 dB 30MHzLPF is selected. -40 -30 dB 30MHzLPF is selected. -40 -30 dB 6MHzLPF, 12MHzLPF is selected. -40 -30 dB 30MHzLPF is selected. f=75MHz/100kHz 6MHzLPF, 12MHzLPF is selected. -40 -30 dB min typ -40 max -30 dB Ratings unit
-70
-60
dB
-60
-50
dB
No.A0909-3/12
LA73062V
Pin Control Table
SW No. SW1 SW2 SW3 SW4 SW5 S_DC D_L1 D_L2 D_L3 IN_Pin No. Pin3 Pin7 Pin11 Pin14 Pin16 Pin6 Pin8 Pin9 Pin10 Pin31 Pin29 Pin28 Pin27 OUT_Pin No. SW function name High (2.3V to VCC) SD_MUTE_CTL Power_Save_CTL Input_CTL Filter_CTL HD_MUTE_CTL S_DET D_LINE1 D_LINE2 D_LINE3 SD_MUTE_OFF Power_Save_OFF CLAMP_ON (RGB_Mode) 12MHz_LPF_ON HD_MUTE_OFF High (4.0V to VCC) High (4.0V to VCC) High (4.0V to VCC) High (4.0V to VCC) Midd (1.8 to 2.4V) Midd (1.8 to 2.4V) Midd (1.8 to 2.4V) 30MHz_LPF_ON HD_MUTE_ON Low (0 to 0.5V) Low (0 to 0.5V) Low (0 to 0.5V) Low (0 to 0.5V) Control voltage Open Low (0 to 0.7V) SD_MUTE_ON Power_Save_ON BIAS_ON (Component_Mode)
Package Dimensions
unit : mm (typ) 3247A
36 19
5.6
1 0.3
18 0.2
15.0
SANYO : SSOP36(275mil)
0.1
(0.7)
0.8
1.7max
(1.5)
0.5
7.6
No.A0909-4/12
LA73062V
Block Diagram
MUTE VCC_SD Y_IN 0.1 F
SW1
1
36
1000 F +
75 75
CV_OUT
+
2
CLAMP
6MHz LPF 6MHz LPF
6dB
Driver
35
MUTE SW1
VCC_DR_SD 1000 F + 75 75 Y_OUT
SW1:SD Mute CTL C_IN 0.1 F
3
6dB Driver
34
4
BIAS 100k
6MHz LPF
33
MUTE SW1
GND_DR_SD C_OUT 1F + 75 75
GND_SD
5
REG3V 6dB Driver
32
S_DET_IN (High/Open/Low)
6
31
10k S_DET_OUT VREG_3V 47 F +
SW2:Power Save CTL D_LINE1_IN (High/Open/Low)
7
REG3V
VREG_3V
30
8
D_LINE2_IN (High/Low)
5V/2.2V/0V
29
10k D_LINE1_OUT
9
D_LINE3_IN (High/Open/Low) REG3V
10k 5V/0V
28
10k
D_LINE2_OUT
10
5V/2.2V/0V
27
D_LINE3_OUT
SW3:Input CTL (CLAMP or BIAS)
11
26
N.C.
VCC_HD Pr/R_IN 1F +
12
CLAMP
25
SW3
12MHz LPF 30MHz LPF
VCC_DR_HD 330 F + 75 75 Pr/R_OUT
SW4 6dB
MUTE Driver
SW5
13
BIAS 100k
24
SW4:Firter CTL (12MHz or 30MHz) Py/G_IN 1F +
14
12MHz LPF
23
SW4 6dB MUTE Driver SW5
N.C. 1000 F + 75 75 Py/G_OUT
15
CLAMP 30MHz LPF
22
SW5:HD Mute CTL Pb/B_IN 1F +
16
CLAMP
21
SW3
12MHz LPF 30MHz LPF
GND_DR_HD 330 F + 75 75 Pb/B_OUT
SW4 6dB
MUTE Driver
SW5
17
BIAS 100k
20
GND_HD
18
19
N.C.
Please shorten the distance of the bold line to prevent oscillation.
No.A0909-5/12
LA73062V
Sample Application Circuit
No.A0909-6/12
LA73062V
Test Input Signal
Pin Function
Pin No. P1 P2 Pin name VCC_SD Y_IN 1.8V DC voltage Signal wave form In put / Out put form
10Vpp 500 1.8V 1k 2 1k
110A
P3
SD_MUTE_CTL
5V: SD_MUTE_OFF 0V: SD_MUTE_ON
10k 3 100k
P4
C_IN
2.3V
2.3V 714mVpp
50A 4
100k 1k 110A
Continued on next page.
No.A0909-7/12
LA73062V
Continued from preceding page.
Pin No. P5 P6 Pin name GND_SD S_DET_IN 5V: 16:9 OPEN: 4.3 Letter Box 0V: 4:3 DC voltage Signal wave form In put / Out put form
3V_REG 200k 10k 6 200k
P7
Power_Save_CTL
5V: Power_Save_OFF 0V: Power_Save_ON
10k 7 100k
P8
D_LINE1_IN
5V: 1125 (1080) OPEN: 750 (720) 0V: 525 (480)
3V_REG 200k 8 10k
200k
P9
D_LINE2_IN
5V: 59.94p/60p 0V: 59.94i/60i
10k 9 100k
P10
D_LINE3_IN
5V: 16:9 OPEN: 4:3 Letter Box 0V: 4:3
3V_REG 200k 10k 10 200k
P11
INPUT_CTL
5V: Clamp 0V: Bias
10k 11 100k
Continued on next page.
No.A0909-8/12
LA73062V
Continued from preceding page.
Pin No. P12 P13 Pin name VCC_HD Pr/R_IN Component: 2.3V (Bias) RGB: 1.8V (Clamp) DC voltage Signal wave form In put / Out put form
2.3V
700mVpp
500
Clamp:OFF
700mVpp 1.8V
13
1k 1k 100k 110A 50A
Bias:OFF
P14
FIL_CTL
5V: 12MHz_LPF 0V: 30MHz_LPF
10k 14 100k
P15
Py/G_IN
1.8V
1.0Vpp 500 1.8V 700mVpp 1.8V 15 1k 110A
1k
P16
HD_MUTE_CTL
5V: HD_MUTE_OFF 0V: HD_MUTE_ON
10k 16 100k
P17
Pb/B_IN
Component: 2.3V (Bias) RGB: 1.8V (Clamp)
2.3V
700mVpp
500
Clamp:OFF
700mVpp 1.8V
17
1k 1k 100k 110A 50A
Bias:OFF
Continued on next page.
No.A0909-9/12
LA73062V
Continued from preceding page.
Pin No. P18 P19 P20 Pin name GND_HD N.C. Pb/B_OUT Component: 2.4V (Bias) RGB: 1.3V (Clamp) DC voltage Signal wave form In put / Out put form
2.4V
1.4Vpp
30 1.3k 1.5k
1.4Vpp 1.3V 30 20
P21 P22
GND_DR_HD Py/G_OUT 1.3V
2.0Vpp 1.3V 1.4Vpp 1.3V
30 1.3k 1.5k
22 30
P23 P24
N.C. Pr/R_OUT Component: 2.4V (Bias) RGB: 1.3V (Clamp)
2.4V
1.4Vpp
30 1.3k 1.5k
1.4Vpp 1.3V 30 24
P25 P26 P27
VCC_DR_HD N.C. D_LINE3_OUT 5V: 16:9 2.2V: 4:3 Letter Box 0V: 4:3
OPEN:OFF High:OFF
300
27
500A
Low:OFF
Continued on next page.
No.A0909-10/12
LA73062V
Continued from preceding page.
Pin No. P28 Pin name D_LINE2_OUT DC voltage 5V: 59.94p/60i 0V: 59.94i/60i Signal wave form In put / Out put form
300
28
P29
D_LINE1_OUT
5V: 1125 (1080) 2.2V: 750 (720) 0V: 525 (480)
OPEN:OFF High:OFF
300
29
500A
Low:OFF
P30
REG3V
3.0V
50 100 26k 32k
30
30k
24k
P31
S_DET_OUT
5V: 16:9 2.2V: 4:3 Lerrer Box 0V: 4:3
OPEN:OFF High:OFF
300
31
500A
Low:OFF
P32
C_OUT
2.4V
2.4V 1.428Vpp 30 1.3k 1.5k
32 30
P33
GND_DR_SD
Continued on next page.
No.A0909-11/12
LA73062V
Continued from preceding page.
Pin No. P34 Pin name Y_OUT 1.3V DC voltage Signal wave form In put / Out put form
2.0Vpp 1.3V
30 1.3k 1.5k
34 30
P35 P36
VCC_DR_SD CV_OUT 1.3V
2.0Vpp 1.3V
30 1.3k
36 30
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above.
This catalog provides information as of August, 2007. Specifications and information herein are subject to change without notice.
PS No.A0909-12/12

▲Up To Search▲

Price & Availability of LA73062V

	To Download LA73062V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .